| marka | Arduino |
|---|---|
| uretici | Arduino |
| urun-boyutlari | 8 x 2.5 x 5.5 cm; 10 gram |
| urun-model-numarasi | A000005 |
| uretici-artik-uretmiyor | Hayır |
| renk | beyaz |
| islemci-sayisi | 1 |
| bellek-saat-hizi | 16 MHz |
| kablosuz-turu | Bluetooth |
| piller-dahil-mi | Hayır |
| asin | B0097AU5OU |
| urun-agirligi | 10 g |
| musteri-yorumlari | /* .cm-cr-review-stars-spacing-big { 4,6 5 yıldız üzerinden 4,6 var dpAcrHasRegisteredArcLinkClickAction; P.when('A', 'cf').execute(function(A) { 5 yıldız üzerinden 4,6 |
| en-cok-satanlar-siralamasi | Şu kategoride 12,221. sırada: Bilgisayar (Bilgisayar Şu kategorideki En Popüler 100 Ürünü göster: ) Şu kategoride 131. sırada: Barebone Bilgisayarlar |
| satisa-sunuldugu-ilk-tarih | 19 Şubat 2021 |
There are no enquiries yet.
|
Bunları Çok Seveceksiniz
|
||
|---|---|---|
Jbgme –
Great product. Ready to use right out of the box.
Most of the non-Arduino versions of this product requires you to locate, download and install the CH340 driver. Instead, the Arduino version uses the FT232 driver. Everything is pre-installed and ready to use, right out of the box. I had it up and running in minutes. In fact, in a networking project I’m playing with, it outperformed my other microcontrolers, including a couple of larger Arduinos. If I can find the time, i will deal with the clones and their CH340 driver.
Bir kişi bunu faydalı buldu
sidewalkchalk –
None of the clones worked so I had to use this
I tried using a clone but it wouldn’t connect to my computer so I had to use this. I wasn’t excited to pay extra for the same thing but what are you gonna do.
Bir kişi bunu faydalı buldu
Koldobika –
Que funcione
Es el original por tanto la calidad es muy buena
Rodrigue Jalbert –
Cadeau
Cadeau
Guadalhorce 22 –
Excelente producto
Este Arduino se programa en el acto, es reconocido y no se producen fallos en la carga.
dmeiss –
I bought this after trying a knockoff that did not work
I had bought a cheaper brand that included six boards for the price that Arduino was selling one. Unfortunately, I could not get a single board to take a sketch. I broke down and bought the actual Nano from Arduino and it worked the first try. The only complaint I had is the cost, but that could be because there are too many cheap boards out there.
David –
Todo perfecto
De momento ningún problema. No descarto coger más.
thomas colligan –
The Arduino nano gives me what I was looking for l
Liked size and capability of nano to assist in my hobby
philipreji –
Works as intended.
Works well.
Bir kişi bunu faydalı buldu
Create_progect –
Ottimo
O passato ore ad usarlo perfetto per iniziare a programmare con Arduino davvero un ottimo prodotto che uso fin da bambino
Mark E.Mark E. –
Great for small prototyping
Hooked it to an ADXL345 3-axis accelerometer to modify sketch – it works great for small projects. Had output within minutes. Be aware it requires a mini-B USB cable that isn’t included.
Pedro Cabezas –
Worked as expected
Worked as expected. Just didn’t come with a power cable. Had to run around for a store that sold it.
Manuel B. –
Falta cable
No viene con cable, y según los comentarios, venía con él.
Retired Technologist –
Just like an Uno, but fits on a breadboard
As my Arduino projects get more complex the Nano plus a larger breadboard helps me keep the wiring a lot cleaner. Works just like my Uno.
Cliente Amazon –
Il Nano originale. Perfetto
E’ il nano originale con ATmega328p, compatibile con tutto il software e le immense librerie esistenti. Consigliatissimo come primo Arduino. Niente a che vedere con i cloni cinesi, qualità italiana e design anche bello esteticamente!!
Beemer –
REal Arduino product
This micro-processor is tough. Being new to Arduino projects I am sure I was harder on this than usual. It is working great for a Digital Compass OTA antenna tuning project.
R0b0tX –
Worked for a short time..
Worked fine for a day, then it overheated and the port failed.
Christopher Bailey –
It just works
I tried. I wanted to save some money. Found a great deal on Nano clones on Amazon and thought I would give it a go. I tried. Had to hunt for Chinese drivers. Went through all the user comments and switched bootloaders. The sketch loaded once. Then the boards simply stopped responding. Waste of time. Waste of money. This is the real board. Works like a charm out of the box. Should never have strayed.
8 kişi bunu faydalı buldu
George Simon –
buy it now before you’re cussing at the machine later
You pay a whole lot more for a genuine argue we know, but if you’re using a Chinese knock off on a CNC machine, the first piece of material you screw up by using that Chinese knock off will cost more than a genuine argentino so suck it up and buy it now before you’re cussing at the machine later
Scott Wilder –
Plug and Play ease of use, bought the authentic version to support team
Bought two and within my first week had a TFT 240p LCD displaying sensor outputs. Has been a great learning experience and worth spending the extra to support the team. In addition Arduinos new IDE should make things 2X better.
Mike –
Geniune Arduino Nano.
You pay at least 2x the price for a real Arduino vs. a Chinese knock-off, however if you want quality parts and assembly, do with the real thing. Make sure you buy from a reputable seller, as some sell fakes. Compare what you get to photos from the Arduino website… fakes will usually not have the correct box, paperwork, and markings on the circuit board.
3 kişi bunu faydalı buldu
D. Sroelov –
works great
i have been using Nano clones for a while, and i thought it would be about time to get a genuine Nano in-house. the original doesn’t behave exactly like the clone, or maybe the clones don’t behave exactly the same as the genuine Nano. of course, the Arduino guys change things every once in a while, and the latest V3 Nano’s are not quite the same as the older V3 Nano’s. that contributes to the slight differences in behavior. in any case, the genuine Nano works fine, and i’m glad i have one around for sanity checks.
Werner Dumps –
Top
Einfach super, ein original halt eben!
Steve –
Nice to have a “real” nano but…
Unless what you’re working on is very quality sensitive or requires very specific sizing, I would recommend a “clone” or “knockoff” nano instead. They have the same feature set but you can often get them at a much better price — I personally I found 3 clones for less than the price of this single “real” nano.However, I will say I have no issues with this particular nano and I would recommend buying one if you’re quality sensitive or want to support Arduino platform directly.
Bir kişi bunu faydalı buldu
Max Kolbe –
works right out of the box.
This little Nano board works great. Did not have to do anything special in plugging it it. I would buy again, if I ever needed a 2nd one.
Bir kişi bunu faydalı buldu
Eric Sandberg –
This is just a Nano board, no hook up cable comes with it.
I only gave this a 4 out of 5 rating since the Nano board did not come with a cable, and it uses a special USB cable, not a micro USB…….so if you order one of these, make sure you get the correct cable to power it and be able to download your software to it.
Bir kişi bunu faydalı buldu
Philmont –
Parfait, bien emballé et 100 pour 100 conforme
J’ai automatise deux moteurs pas à pas avec cette carte. Elle fonctionne parfaitement comme tous les produits d’origine Arduino. C’est plus cher mais ça marche. Ce n’est pas toujours vrai avec les copies.
Bir kişi bunu faydalı buldu
Brian –
Works as intended.
There is a bit of a learning curve to program it, but once you figure it out (or borrow code someone else has made and left online for use) it works great. I personally used mine as a controller for a NeoPixel ring I have, and am able to control every aspect of it through the Arduino.
Victor HVictor H –
Ide Arduino No lo reconoce
Tuve que instalar los controladores ftdi ft232 para que el Arduino nano funcionara, la IDE detecta la placa pero la marca como desconocida; el detalle de que la instalación del ide no tenga los controladores resulta extrano, las imagenes mostradas en la publicación no corresponden al componente que recibí, quizá es una versión más antigua, la serigrafía no es la misma.
2 kişi bunu faydalı buldu
Mario –
Original always the best
Work great and no serial communication problem with longer usb cable compare too the cheaper one. The cheaper one work ok with short usb cable.
Jose Luis Arias Lopez –
Funciona perfectamente. Sin problemas.
Me ha gustado el acabado. Perfecto para el aprendizaje y pruebas de circuitos.
Solax –
Ok…
Davvero fantastici ma attenzione:richiede un driver apposito che non sempre si installa da solo per la comunicazione in seriale, per fortuna si trova sul web facilmente, e gli ultimi due pin analogici non funzionano da output e né da input digitale e bisogna usare analogRead.
4 kişi bunu faydalı buldu
Norby –
Arduino nano
Gli Arduino genuini sono di qualità ottima!
Bir kişi bunu faydalı buldu
Dave Kik –
This is the real deal
I know you can buy the spin off verity for $5 but it feels better programming the real thing.The quality is awesome.I was concerned because the pictures show 2 different boards. I am assuming this is version 3.3Make sure you download the latest Arduino IDE (1.8.6) to communicate.This works perfect.Combine this with your favorite terminal adapter and on you go.
15 kişi bunu faydalı buldu
Early Adopter –
This Nano version doesn’t upload sketches on Raspberry Pi 3B+.
This Nano works OK on my PC but cannot upload sketches from the Rapberry Pi even though (1) I have latest version of Arduino IDE Linux Arm 32 bit installed on the Pi 3B+. Have tried various solutions found online. Others have apparently had this problem. I contacted Arduino, but support there could not solve the problem. My return time frame has passed so I am stuck. Wonder if one of the newer Nanos would work better with the Pi. Note that this Nano is 5V and Pi is 3.3 V. However, I also have an Uno (5V) which works well with the Pi. Error message on attempt to upload sketch to Pi references avrdude. Problem is beyond my skill level to solve and seems likely to be related to incompatibility of Pi and this version of Nano–maybe due to drivers.
3 kişi bunu faydalı buldu
Alberto –
Qualità eccellente anche se prezzo un po’ altino
Bhe che dire, Arduino Nano originale, con un packaging impeccabile, con pin già saldati, adesivi inclusi, a differenza di 2 anni funziona ancora benissimo, forse il prezzo è un po’ alto ma ha una qualità eccellente
Bir kişi bunu faydalı buldu
Silvio –
PERFETTO!
Arduino originale, ma per l’utilizzo con il programma arduino 1.8.12 su windows 10 necessita il download dei driver FTDI e nello specifico la versione 2.12.26
Bir kişi bunu faydalı buldu
P.M. Grates –
The Real Stuff
I like to use actual Arduino hardware (not a knockoff), and this seller supplied it accurately and quickly.
robbiedukes –
Good microcontroller
I like it but with my great fingers it can be tough to work with…I need more of them
A. Schlottman –
The original is the best
I tried a couple of the other brands of this nano board, but found them to be of lesser build quality when it comes to the input voltage. A 5V 15A input to the vin of those boards knocked the vin port out immediately. This original product did the trick and allows my creative mind to explore more options with greater reliability. Great purchase, and great product!
6 kişi bunu faydalı buldu
Ralph faber –
Genuine Arduino
This is a genuine Arduino Nano (unlike some other knock offs you can find for half the price and with quadruple of the headache). It works great and as expected out of the box.
Rick Mcneely –
A very nice upgrade from the Nano v3
What’s not to like? It’s a much faster processor with 50% more program space, 200% more RAM, multiple UARTs, and in a Nano v3 pin-compatible form-factor. Less than $10/ea in a 3-pack. I only wish I’d found it earlier.
D-Dog –
Used in spot welder
Used in a spot welder project. Just gotta roll up the sleeves and take the coding plunge.
Mohammed Ali –
It works pretty well.
It’s working with the small projects I’m doing. I wish it came with a cable
HowaHowa –
Factory Quality Issue
Pretty sure D4 and D5 should not be soldered together. Will have to return and order another one.
Bir kişi bunu faydalı buldu
D. Garber –
Flawless
Unlike cloned brand Nano boards, this Arduino branded board won’t trip you up or fail you. I’ve found that using no-name generic devices, boards, sensors, etc in my electronics hobby only adds frustration, lessening the time I really enjoy myself.
Amazon CustomerAmazon Customer –
D4 & D5 arrived with shorted/soldered terminal joints
D4 & D5 connections were soldered together during assembly process at manufacturer. Was able to de-solder & separate the joints but still an unfortunate pain. I expected better since this wasn’t a knockoff.
Emilly hays –
Did not work.
I got the nano in the mail, soldered it to my PCB and it didn’t even turn on… and since it is already soldered I can’t return it. I’m sad it came broken!
Kyle Upton –
Nano, for sure!
I knew it was small, but its actually even smaller than i thought. It has been a joy to use and to have an official arduino instead of a copycat. No difference in functionality but supporting those who made this great product possible, it means a lot!
Chris –
Poor value for money
I currently have two of these, and for $20 a piece I’m pretty disappointed. After purchasing the original Arduino branded ones, I went and purchased some off branded Nanos from Elegoo. At this point, I would say I prefer my knockoff Nanos as opposed to the branded ones. I have always had some issue when using these, and overall the knockoffs seem to outperform the original, such as a considerable faster upload speed and ability to register as a device as soon as I plug it into my computer (I always have to manually choose which port to use when using the original). It’s pretty disappointing considering the price disparity as well. Normally, I would give the benefit of doubt to the brand name and call it a dud, but I have two of them. Needless to say, I won’t be purchasing another Nano from Arduino. The only reason I’m giving it three stars is because without them, we wouldn’t have the Nano in the first place, and I respect them for open sourcing their products.
4 kişi bunu faydalı buldu
brien steffey –
couldn’t use
need them without headers. header too thick for use with IC sockets.
Bir kişi bunu faydalı buldu
Joseph H. –
hat alles prima geklappt bin voll zu Frieden.
Würde das Produkt bei Bedarf wieder bestellen.
Consumer –
This is the “Real” Arduino Nano not a knock off.
I like the tiny size of the Nano. I had difficulty uploading programs at first but finally got that resolved. Now it works like a champ. You certainly get what you pay for. I will only buy these from now on.
Bir kişi bunu faydalı buldu
Loren L. Leimer –
Worked the First Time
Tried using Chinese Arduino clones. Wasted 2 weeks communicating with China tech support trying to get their product to accept an upload. Price doesn’t matter if you can’t use it. The genuine Arduino Nano programmed the first time and proved “It wasn’t me!!”.
Bir kişi bunu faydalı buldu
Daron –
Simple, presoldered
A lot easier to get set up than the cheaper stm32 counterparts. Pins are already attached so it’s reading to go out of the box. Only gripe is the use of the older mini-b standard.
Amazon Customer –
Great product
Done with the clones, genuine arduino is the way to go.
David W. –
Another great arduino product
Uses same arduino IDE as my UNO and MEGA. Love the compact size.
nmw01223 –
Not bad for the orice
Useful little module for including in embedded projects.
Markus –
Alles bestens, ein original Arduino!
Ich kauft mir diesen originalen Arduino NANO, da ich Probleme mit einem “CHINA-Nachbau hatte”!Bluescreen bei Win10 CH390 Schnittstelle, hieß die Fehlermeldung.Dieser originale Arduino NANO besitzt einen FTDI-Chip, der das Problem behoben hat.Werde in Zukunft lieber mehr Geld für gewissen Anwendungen ausgeben und da lieber einen originalen Arduino verbauen!Die Verpackung war in Ordnung, schlicht und einfach!Die Pins sind bereits aufgelötet und werden mit einem Moosgummi gegen Beschädigungen geschützt.
3 kişi bunu faydalı buldu
Ruebarb –
Real Nano, underpowered vs Uno
It is a real Nano. Despite what is claimed these are far underpowered and can’t run all of the same code of the UNO. Very limited use.