Arduino Nano 33 IoT kartı .tr Bilgisayar
| marka | Arduino |
|---|---|
| uretici | Arduino |
| seri | Arduino Nano 33 IoT |
| urun-boyutlari | 5 x 7 x 2 cm; 9 gram |
| piller | 1 Bilinmeyen pil gereklidir. |
| urun-model-numarasi | ABX00027 |
| ekran-boyutu | 1 Santimetre |
| islemci-markasi | ARM |
| ram-boyutu | 1 MB |
| bilgisayar-bellek-turu | SRAM |
| desteklenen-maksimum-bellek | 1 MB |
| sabit-surucu-boyutu | 1 MB |
| sabit-disk-aciklamasi | HDD |
| sabit-surucu-arabirimi | ATA-4 |
| sabit-disk-donus-hizi | 1 |
| ekran-karti-aciklamasi | Integrated |
| grafik-ram-turu | DDR DRAM |
| ekran-karti-bellek-boyutu | 1 |
| ekran-karti-arayuzu | Tümleşik |
| baglanti-turu | Bluetooth |
| kablosuz-turu | Bluetooth |
| voltaj | 3.3 Volts |
| optik-surucu-turu | BD-R |
| isletim-sistemi | DOS |
| piller-dahil-mi | Hayır |
| asin | B07VW9TSKD |
| urun-agirligi | 9 g |
| musteri-yorumlari | /* .cm-cr-review-stars-spacing-big { 4,6 5 yıldız üzerinden 4,6 var dpAcrHasRegisteredArcLinkClickAction; P.when('A', 'cf').execute(function(A) { 5 yıldız üzerinden 4,6 |
| en-cok-satanlar-siralamasi | Şu kategoride 7,284. sırada: Bilgisayar (Bilgisayar Şu kategorideki En Popüler 100 Ürünü göster: ) Şu kategoride 74. sırada: Barebone Bilgisayarlar |
| satisa-sunuldugu-ilk-tarih | 22 Şubat 2021 |
General Enquiries
There are no enquiries yet.
İlgili Ürünler
-
-
$3.20 + Kargo -
Orijinal fiyat: $935.36.$607.98Şu andaki fiyat: $607.98. + Kargo
-
Fiyat aralığı: $619.46 – $651.14 + Kargo
-
Orijinal fiyat: $32.70.$15.20Şu andaki fiyat: $15.20. + Kargo
-
-
Orijinal fiyat: $9.22.$4.70Şu andaki fiyat: $4.70. + Kargo
-
Orijinal fiyat: $1,082.27.$125.26Şu andaki fiyat: $125.26. + Kargo
-
Fiyat aralığı: $231.58 – $299.94 + Kargo
-
Orijinal fiyat: $1,158.86.$579.42Şu andaki fiyat: $579.42. + Kargo
-
-
-
$30.40 + Kargo -
Orijinal fiyat: $9.73.$6.22Şu andaki fiyat: $6.22. + Kargo
-
$110.40 + Kargo -
Fiyat aralığı: $12.21 – $14.18 + Kargo
-
Fiyat aralığı: $667.78 – $814.22 + Kargo
-
Fiyat aralığı: $567.62 – $890.06 + Kargo
-
$638.40 + Kargo -
$25.58 + Kargo -
Orijinal fiyat: $235.20.$5.60Şu andaki fiyat: $5.60. + Kargo
-
$1,374.40 + Kargo -
Orijinal fiyat: $672.00.$268.80Şu andaki fiyat: $268.80. + Kargo
Yeni eklenenler
|
Bunları Çok Seveceksiniz
|
||
|---|---|---|
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
Maurizio Matiz –
I love Arduino
Ottimo come sempre.
Cliente Amazon –
ottimo prodotto
tutto come previsto. prodotto originale, pacco in perfetto orario
Burt R. –
Great job
Nice on time
Amazon KundeAmazon Kunde –
Achtung Verpackung schrecklich
Das Produkt ist an und für sich super! Hab mir einen Lokal gekauft und der funktioniert tadellos. Wollte für ein Projekt jetzt einen zweiten und habe ihn mir hier bestellt. Das Produkt kommt in einer “Briefverpackung” und war komplett eingedrückt. Habs nicht ausprobiert ob es noch geht. Kann ich mir aber nicht vorstellen. Da ist sicher was verbogen. Geht genau so wieder zurück. Schade eigentlich.
Bir kişi bunu faydalı buldu
AZbuyer –
The Arduino Nano 33 IOT has no EEPROM!!!
I would have given this board a 4 and almost a 5, but it has absolutely no EEPROM! This makes it difficult to use for control applications where default and max/min settings will need trimming and storing.As supplied, the board is set up for BLE, the ESP32 which controls the radio has to be reprogrammed through a pretty convoluted process to change it to BT classic.
8 kişi bunu faydalı buldu
maurizio –
Ottimo
Indispensabile per sperimentazioni e progettazioni dei sensori
Cliente Amazon –
Perfecto
Perfecto. Este si funcionaUna auténtica pasadaJusto lo que necesitabaEl servicio de Amazon simplemente perfectoGracias
Cliente de Amazon –
Producto original
La caja llegó un poco golpeada pero el producto está bien
Greg –
Parfait
Fonctionne parfaitement. Fini de prendre les chinoiseries , clone etc…..
Charles M. –
Happy With Purchase
Very happy I ordered this Arduino Nano 33 IoT
James Harrison –
Bricked Arduino.
Very gutted. I bought the product. Worked well out of the box, but had a message to update the firmware. I eventually started the update , but it failed. Now the Arduino is a brick. My main problem is there are NO instructions in the manufacturer’s packaging that tell you how to update it.
2 kişi bunu faydalı buldu
Jesus –
Simple y compacto
Buen producto
Sam Myres –
Simply stopped working
I bought one of these to work on a project where I was going to communicate with a sim cell module but shortly after getting it to work it was bricked somehow (literally no clue, static isn’t a problem here in the summer, wasn’t using it without current limiting resistors etc) and I stopped seeing it when I plugged it in.
tiopollo –
very tiny
it is very small. i like it
Mirko F. –
Ok ma..
Saldare gli headers richiede davvero tanta manualità viste le dimensioni ridottisimme della scheda. Non è proprio alla portata di tutti e sicuramente non a quella di amatori che hanno bisogno di una scheda pronta all’uso.
Tech Buyer –
Endless possibilities but has issues
Its truely amazing what you can do with this.Though there is a known problem with the Arduino Nano 33 IoT where most of the time COM channel is switched and you have to fiddle with it to allow you to upload.Also because of this COM issue, its hard to get a debugger attached to the COM channel.
6 kişi bunu faydalı buldu
PCH_ID –
New Nano33
Le Wifi en plus mais moins de mémoire que le BLE… Ça reste top !
Timy04 –
OK
Fonctionne bien
Bir kişi bunu faydalı buldu
Roger123 –
Turns into a brick easily
Nice alternate to the ESP32 but mine quit accepting sketches.
Bir kişi bunu faydalı buldu
Florian Vande Mert –
Produit peu cher, et fait ce qu’on en attend
J’ai commandé ce modèle d’Arduino pour un projet scolaire en IoT qui utiliserait le Bluetooth et un GPS externe. La technologie SAMD est parfaitement adaptée à l’utilisation de modules I/O tels que des GPS ou GSM grâce à ses ports Uart pré-configurés. Le produit est arrivé le jour prévu, aucun souci.
Bir kişi bunu faydalı buldu
Amazon Customer –
Don’t buy this device your will get UBS connection issue.
If you have a genie project that you want to display on a circular screen, this product is not ready for that yet. I have to return two of them with the same issue. “Windows it doesn’t recognize UBS device” error. There is not good documentation, on why I am getting this error, and how to fix it.
Cliente Amazon –
Va
Va bene funziona alla grande IoT cloud è un po’ complicato ma vince sempre l’uomo!
_Fire_ –
Gut für Einsteiger
Der Arduino Nano 33 ioT ist gut für Einsteiger oder Fortgeschrittene. Die Cloud ist einfach zu bedienen und übersichtlich aufgebaut. Leider ist die Cloud in der Gratisversion auf 5 Ein- bzw. Ausgaben beschränkt sowie auf 5 Geräte beschränkt. Die Kompilierzeit auf dem Onlineserver ist zudem ebenfalls beschränkt. Gegen eine Gebühr von 7$ im Monat gibt es ein Angebot für bis zu 5 Arduinos mit 20 Ein- und Ausgaben und unbeschränkter Kompilierzeit. Über die Laufzeit eine eher kostspielige Angelegenheit.Für kleinere Projekte allerdings TipTop.
4 kişi bunu faydalı buldu
alessandro –
Für erfahrene Bastler perfekt.
Funktioniert 1a hatte leider aber auch einen der gesponnen hat nach vielen Tests.
Steve –
Nichts auszusetzen
Guter Microcontroller, Wifi direkt dabei.Eigentlich nichts auszusetzen.Die Arduino Cloud wäre grundsätzlich auch ganz nett – falls man diese nutzen will. Leider ist die kostenlose Version zu eingeschränkt – und der Rest für reine Hobbyprojekte schon teuer.
Fermineg –
Llegó antes de la fecha programada, producto 100% original
Llegó en tres días (cuatro antes de la fecha indicada).El producto es original, viene en su caja con manual y calcas.Lo conecté a mi computadora y lo reconoció inmediatamente.
Salvatore –
Ottimo
Ottimo Venditore … fantastic +++++++
Maël –
Tres bon produit
Pour avoir eu un Arduino nano 33iot de Arduino et celui la de Amazon en reconditionner, je ne vois aucune différence entre les deux si ce n’est le prix.
Bir kişi bunu faydalı buldu
Pietro MarchettaPietro Marchetta –
Ottimo
Venditore serio. Il prodotto è come da descrizione. Appena arrivato ho realizzato subito un progetto.
Bir kişi bunu faydalı buldu
NB –
cool
these micro processors are just amazing.
Bir kişi bunu faydalı buldu
Frank Milburn –
Nice little board, works great
Easy way to add WiFi to a project
JAFO –
Small, cheap, and broken
I have a dozen of so various arduino and clone microcontrollers. This one is fiddly, temperamental, and suffers from a number of design flaws.
Happy Shopper –
These little things are awesome
This is my first experience using Arduinos. I’ve used RPIs for years. I’m impressed with the boot time, and size/power consumption. perfect little devices for my embedded project!
Bir kişi bunu faydalı buldu
Paul Tarr –
Connections difficult.
Works great. My only problem was soldering wires to the board but I’m inexperienced at soldering. Nonetheless I successfully made the connections. Having Bluetooth already on the board was great.
Frankly –
Versatile durable board
I’ve used ESP32 based board in a few projects now and it works very well. Granted you can get an ESP32 cheaper but if you just need it to work as expected this is an easy way to go.
Scott –
Perfect alternative to Raspberry Pi for hardware monitors
Arduino has always struggled versus the raspberry pi’s ability to easily connect wifi, making the RPI the go-to choice for integrating to network services. However, the relative weakness of RPIs GPIO vs the Arduino’s great PWM/Analog/Digital IO makes it more difficult to do simple hardware integrations with. I *love* this solution and have been thrilled with it. The WifiNINA library makes connecting trivial, and making web requests to post updates is so simple. I now finally have the best of both worlds – great IO and low power with simple reliable networking. The addition of Arduino Cloud is a nice touch, but the monthly cost has kept me from doing anything more than exploring that option a little bit. Great product, highly recommended.
2 kişi bunu faydalı buldu
Samir –
After connecting 2nd time to usb and the board gets hot and unable to detect via usb
After connecting 2nd time to usb and the board gets hot and unable to detect usb
‘which it’s Preserved Killick here’ –
Arduiono sketches seem a bit Mickey Mouse
The Arduino software is a bit Mickey Mouse but maybe OK for a beginner. The main() function is hidden and there is a setup and loop function that you are supposed to work with. There is a large code library and the code I have seen has no comments in it. A lot of it seems like it was written by C++ developers who want to create a lot of useless layers of pass thru functions or they will write a dozen constructors and only use one or two. You may say that unused code does not get compiled. True but it makes more crap to wade through when analyzing. The I2C bus died after a week but forturnately the SPI bus still works. I bought an external debugger to use with it but the debugging code is so poor that it is more trouble to use than not. I also have problems getting large programs to upload (download in the world of rational folk). I don’t change anything in the code but after a lot of resetting and rebooting it might upload.So I got a Nordic 52nRF series dev board and life is good again.
Jaime Munarriz Ortiz –
Arduino con WiFi y BT, con giróscop
Muy cómodo, al incorporar sensores de movimiento con conectividad WiFi y Bluetooth.
Hazem –
Will Never Buy Another
You can do much better just look around.
Tom Kennedy –
Works great with Arduino Cloud
I had been wrestling with getting a no name ESP32 board to work right and thought I would spend the extra money to try this board out. Clearly the Arduino Cloud environment is designed to make these boards much easier to us as my project came together super quick and easy with this board. Saved a lot of time that made the extra money worth it – for me anyway.
Mike Abretske –
Two bad out of the box.
I have one of these, but the BLE stopped working – granted, it was tossed around in my laptop bag for months and months, but alas something went bad with the UBLOX it seems. I can still upload to it and use it, I/O still works, just no BLE. So,,, I ordered as replacement here, received it, soldered in the pins and hooked it to my USB and the green light comes on and the yellow light blinks – like it has a blink sketch loaded. No biggie – but I can’t upload to it. In fact, Win10 Device manager doesn’t even see it. Double-clicked the RESET button and now I have a pulsing LED with about the same frequency. Bootloader mode I see. Still – Win10 does NOT recognize it in the device manager. Did I fry it while soldering? Checked all my joints, they all look good. Sent it back DOA and got a replacement.Received the replacement. Didn’t bother trying to even solder it. Plugged it in straight out of the box. EXACT SAME BEHAVIOR. Did I really get two bad in a row?? There seems to be a BLINK sketch in it. How did it get loaded? Double-clicking also puts it in bootloader mode/pulse mode. A power reset puts in back in blink mode. In NO event can I upload to it OR does the Device Manager see it. My original nano 33 IOT still works and uploads and spits out data to the serial monitor. What gives?*** UPDATE 1/14/2021: Sent this second unit back as well and ordered a Nano 33 BLE Sense – looks like people are having a really good experience with that one. I’ll have to look into it a bit deeper, but from the surface, it seems that it is 100% compatible with the hardware that I already have hooked up w/the 33 IOT (pinouts/3.3V) AND the libraries that I am already using (ArduinoBLE). With my sketch and hardware it may very well be a drop in swap. Same UBLOX BLE module. Just faster w/more memory and sensors. And more expensive of course.*** UPDATE 1/15/2021: Received the Nano 33 BLE Sense and it has THE SAME PROBLEM!! Recap: My current Nano 33 IOT works, but neither of the TWO new ones did NOR does this one. I can go back and forth all day, the old one works but the new one doesn’t. ALL of the new ones power up and appear to demonstrate the installation of a blink sketch and also go into bootloader mode with a doubleclick of the reset button, but NONE of them will show up in the WIN10 device manager – I flexed the pcb on the new one and it came ALIVE in the Win10 Device Manager. Relaxed the flex and it would no longer talk. Installed a BRAND NEW CABLE and NOW it works consistently. Recall, the OTHER cable works fine EVERY time with the older/existing 33 IOT. So, there’s some kinda connector/connection issue. I never swapped the cable out because it works, and works stably and consistently, with the original PCB.. Keep this in mind folks. It freakin’ drove me nuts.
5 kişi bunu faydalı buldu
Amazon Customer –
As advertised., new and just great!,
Applied in a medical device project…
Uznanie –
Novedad
Hay que tenerlo para estar al dia
ing Armenante Matteo –
Tutto
Ottimo prodotto molto versatile
Johm Mallett –
Great as controller. Smallest wifi interface.
Love it. Great as a wifi interface to weather station items on I2C or direct analog/digital.
Bir kişi bunu faydalı buldu
Benjamin WongBenjamin Wong –
Great quality and fast delivery.
Great quality and fast delivery.
Olaf D.S.Olaf D.S. –
Ottimo prodotto
Ottimo prodotto: scheda con un sacco di funzioni e venduta assieme ai due strip laterali (da saldare), alla spugna anti cariche elettrostatiche e agli immancabili adesivi di Arduino. Unica pecca, la scatola è arrivata un po’ saccagnata; forse un minimo di imballaggio in più sarebbe stato utile.
Bir kişi bunu faydalı buldu
David –
Just about useless for micropython
If you plan to use this for micropython or circuitpython it’s better to buy it with the right boot-loader as reflashing this with a new boot-loader is crazy. In the end I shelved this in favor of a Adafruit Feather nRF52840.
Thomas –
Sehr schnell – aber instabiles WLAN
Verglichen mit den alten Nanos (mit Ethernet Shield) extrem viel schneller.Server und Client sind sehr reaktiv und brauchen nur wenig Speicher dank co-Prozessor.Das gefällt.Allerdings ist die WLAN Verbindung alles andere als stabil und bricht alle 10-20 Stunden aus bisher nicht klärbarem Grund ab. Da sind die ESP32 wesentlich stabiler. Bisher keine Hilfe auch im Arduino Support Forum.WLAN Reconnect klappt auch nicht immer, ab und zu hängt der dabei einfach.Nur mit dem dritten Sicherheitsnetz (Watchdog reset) ist ein 7×24 Betrieb möglich, wobei der dann alle 10-20 Stunden neu verbindet (dafür jeweils eine minute offline ist) und alle 2-3 Tage vom Watchdog neu gestartet wird (wobei alle Speicherinhalte verloren gehen).
4 kişi bunu faydalı buldu
Antonio Vasco –
Attenzione all’ imballaggio: ho trovata una sola strip che era fuori del pacchetto.
Nel pacchetto, parzialmente schiacciato, non c’erano le strip di pin. Una di esse era nella confezione esterna di trasporto, non chiusa in alcuna bustina. L’altra…io non l’ho trovata. Poco male comunque, solo un problema di imballaggio. La scheda credo sia fantastica. Aspetto di farci molti esperimenti. Saluti.
Sha The Lion –
Increible que tenga tanta funcionalidad en algo tan pequeño
Es increible como algo tan pequeño encierra tanta funcionalidad. Lo estoy usando como uno de mis primeros proyectos porque me interesa mucho lo de IoT y mi unica dificultad fue encontrar la configuración correcta en el IDE pero después de buscar un poco rápidamente encontre lo que me faltaba.En general es un excelente producto que no puede faltar en tus proyectos de DiY, aunque si eres primerizo en esto de los arduinos te recomiendo que empieces por el Arduino UNO antes de irte por este.
Claudio B –
Ottimo prodotto
Arduino versatile ottimo per i.cloud ed affidabile con nuova release.
bohne –
Toller Einstieg ins IoT
Ein sehr spannender Arduino, da WLAN und BLE hier auf einem sehr kleinen Raum zu finden sind, im üblichen Format des Arduino nano und mit modernem Cortex M0+ Mikrocontroller!Ich habe eine Tutorial-Serie mit diesem Mikroprozessorboard auf Youtube gestartet, da es einen einfachen Einstieg in die Welt des IoT bietet. Suchbegriff: “Arduino nano 33 IoT mit MQTT cloud verbinden [DEUTSCH]” .Einzig der Preis ist etwas zu hoch, wenn man vergleichbare Produkte mit einem ESP32 oder ESP8266 betrachtet. Aber der nano 33 IoT ist ein offizieller Arduino, damit unterstützt man Pioniere der Maker-Szene!
(•_•) –
Review really about software support
Haven’t actually hooked the think up yet… but soon. BUT… realized with some research that there’s no support in Arduino libraries (that I’ve found) for BLE 4.2 JustWorks encryption. So I’m saying 4 our of 5, not about the product, but about the absence of that library. About time, isn’t it?